| Long guns (includes all metal) |
225.00 |
| Handguns (add $20.00 for two-tone) |
165.00 |
| Frame or slide only (includes all small parts) |
90.00 |
| Extra magazines |
12.00 each |
| Bore Sight Customer Gun |
25.00 |
| Test fire Highpower Rifle (ammo not included) |
45.00 |
Drill and Tap Barrel or Receiver for Sights
1st hole
2nd hole
3rd and more holes (each)
|
25.00
15.00
15.00 |
| Cut Dovetail in Barrel |
45.00 |
| Install Front sight ramp (D & T or soldered) |
50.00 |
| Check headspace |
25.00 |
Install Sights & Collimate-Gun drilled & tapped
Gun not drilled & tapped (add D&T above)
Make Chamber Cast |
50.00 |
| Install Liner in Barrel-.22lr cal |
125.00 |
| Adjust existing trigger: Hone or rebuild |
35.00 - 100.00 |
| Cut and Crown Barrel |
75.00 |
| Rebarrel – New Barrel |
POR |
| Lap Bolt Lugs |
45.00 |
| Install Sako Extractor (extractor included) |
125.00 |
Thread chamber and crown New bbl
(exceptions winchester model 70 pre 64 style - 250.00) |
175.00 |
| Blue print and True up Rem 700 only |
175.00 |
| Index bbl w/above work for Flutes, sights or adaptor |
50.00 |
| Thread muzzel for brake or suppressor |
75.00 |
| Index for Brake or suppressor |
50.00 |
| Install muzzle brake and match contour of bbl (plus refinish) |
50.00 |
| Shrewd brake complete |
175.00 |
| Pillar bed and float bbl |
175.00 |
| Install afte rmkt bottom metal |
50.00 - 75.00 |
| Skim bed aluminum block stock |
75.00 |
| Install embedded rail system (plus finish) |
125.00 |
| Trigger job (most rifles) |
50.00 - 75.00 |
| Fit match bbl & bushing |
175.00 |
| Cut Frame bridge for supported bbl |
75.00 |
| Trigger work basic (plus parts) |
75.00 |
| Beaver tail grip safety (plus refinish) |
75.00 |
| Ambi safety |
65.00 |
| Install Magwell (plus refinish) |
75.00 |
| Low mount sights plus cross front (Bomar, Henie, Novak) |
125.00 |
| Extractor or Ejector (plus test fire) |
35.00 |
| Fit match bushing only |
35.00 |
Basic trigger job on S & W or similar |
60.00 |
| Sling studs 2 front 1 rear |
40.00 |
| REM- OR WIN-CHOKE system: (Includes one tube) |
79.95 |
| Install Pad, Cut, Blend, etc. (NOT high gloss) |
60.00 - 75.00 |
| Install Pad on plastic stocks |
100.00 |
